Valad Electric Heating Corp.
Valad Electric Heating Corp.
Mailing Address:
65 Leonards Drive
Montgomery, NY 12549
Phone: 888.509.4927
Fax: 845.457.3793
E-Mail: info@valadelectric.com
Website: www.valadelectric.wpengine.com
Print Back
Valad's Forced Air Heaters are manufactured from the highest quality corrosion resistant materials and meet military, marine and industrial specifications. Used to heat large non-hazardous environments to a specified temperature.

Cabinet: 304 Stainless Steel.

Heating Element: Stainless steel flat oval tubular design. Finns are furnace blazed to sheath. Heating elements are hermetically sealed.

Electrical Specifications: Units are manufactured to guide lines of USCG, IEEE45, UL, ETL, Navy, Army, Air Force and Marine Corp. standards; as well as custom applications.

Unit is manufactured I/A/W USCG, IEEE 45 and ANSI/UL-2021 specifications.
Unit of Measure

Specifications

Voltage

 N/A 440 VAC450 VAC460 VAC480 VAC

BTU

 N/A 85304-136486 Btu

Wattage

 N/A 27.5 kW28.0 kW28.5 kW29.0 kW29.5 kW30.0 kW30.5 kW31.0 kW31.5 kW32.0 kW32.5 kW33.0 kW33.5 kW34.0 kW34.5 kW35.0 kW35.5 kW36.0 kW36.5 kW37.0 kW37.5 kW38.0 kW38.5 kW39.0 kW39.5 kW40.0 kW

Phase

 N/A 3 PH

Cycle

 N/A 60 Hz

Air Volume (CFM)

 N/A 3445

Air Outlet Height

 N/A 21-1/2 in

Air Outlet Width

 N/A 22-1/2 in

Weight

 N/A 200 lb

Heater Includes

 N/A 12" Ceiling/Bulkhead Bracket Auto and Manual Hi-Limit Thermostat Contactor Fan, Motor, and Louvers Fan/Off/Heat Switch Fused Transformer (When Required) Marine Terminal Box Operating Thermostat Stainless Steel Hermetically Sealed Heating Elements

Construction

 N/A 14 Ga 304 Stainless Steel

Suggested Applications

 N/A Cranes Factories Hangers Material handling equipment Mobile vans Oil rigs Ships Storage areas

Certifications/ Guidelines

 N/A ANSI/UL-2021 I/A/W USCG IEEE 45

Options

 N/A FB - Floor Bracket SB - Sway Bar Wall Shelf Accessory