Valad's Forced Air Heaters are manufactured from the highest quality materials and meet all military, marine and industrial specifications.
Cabinet: Stainless Steel.
Heating Element: Stainless steel flat oval tubular design. Finns are furnace blazed to sheath. Element is hermetically sealed. Cast aluminum elements are used on some models.
Electrical Specifications: Units are manufactured to guide lines of USCG, IEEE45, UL, ETL, Navy, Army, Air Force and Marine Corp. standards; as well as custom applications.
Unit is manufactured to USCG, IEEE 45 and ANSI/UL-2021 specifications.
Heater can be used in fan position for air only.
Cabinet: Stainless Steel.
Heating Element: Stainless steel flat oval tubular design. Finns are furnace blazed to sheath. Element is hermetically sealed. Cast aluminum elements are used on some models.
Electrical Specifications: Units are manufactured to guide lines of USCG, IEEE45, UL, ETL, Navy, Army, Air Force and Marine Corp. standards; as well as custom applications.
Unit is manufactured to USCG, IEEE 45 and ANSI/UL-2021 specifications.
Heater can be used in fan position for air only.
Unit of Measure
Voltage |
N/A 110/120 VAC208/220 VAC |
BTU |
N/A 1706-5118 Btu |
Wattage |
N/A 0.5 kW1.0 kW1.5 kW |
Phase |
N/A 1 PH |
Cycle |
N/A 60 Hz |
Air Volume (CFM) |
N/A 60 |
Weight |
N/A 40 lb |
Heater Includes |
N/A Auto & Manual Hi-Limit Contactor Fan/Off/Heat Switch Operating Thermostat 40-100 DEG F Power Terminal Block |
Construction |
N/A Elements with Fins Furnace Brazed Heating elements hermetically sealed Stainless Steel Cabinet |
Suggested Applications |
N/A Anywhere a recessed wall-mounted application applies Communication shelters Hallways In-the-wall application applies Offices Oil rigs Ships Small craft |
Certifications/ Guidelines |
N/A ANSI/UL-2021 IEEE 45 USCG |
