Valad's Forced Air Heaters are manufactured from the highest quality corrosion resistant materials and meet military, marine and industrial specifications. Used to heat small to large non-hazardous environments to a specified temperature.
Cabinet: 304 Stainless Steel.
Heating Element: Stainless steel flat oval tubular design. Finns are furnace blazed to sheath. Heating elements are hermetically sealed.
Electrical Specifications: Units are manufactured to guide lines of USCG, IEEE45, UL, ETL, Navy, Army, Air Force and Marine Corp. standards; as well as custom applications.
Unit is manufactured I/A/W USCG, IEEE 45 and ANSI/UL-2021 specifications.
Cabinet: 304 Stainless Steel.
Heating Element: Stainless steel flat oval tubular design. Finns are furnace blazed to sheath. Heating elements are hermetically sealed.
Electrical Specifications: Units are manufactured to guide lines of USCG, IEEE45, UL, ETL, Navy, Army, Air Force and Marine Corp. standards; as well as custom applications.
Unit is manufactured I/A/W USCG, IEEE 45 and ANSI/UL-2021 specifications.
Unit of Measure
Voltage |
N/A 220 VAC240 VAC440 VAC450 VAC460 VAC480 VAC600 VAC |
BTU |
N/A 6824-25591 Btu |
Wattage |
N/A 2.0 kW2.5 kW3.0 kW3.5 kW4.0 kW4.5 kW5.0 kW5.5 kW6.0 kW6.5 kW7.0 kW7.5 kW |
Phase |
N/A 1 PH 3 PH |
Cycle |
N/A 60 Hz |
Air Volume (CFM) |
N/A 700 |
Air Outlet Height |
N/A 11.75 in |
Air Outlet Width |
N/A 13.5 in |
Weight |
N/A 75 lb |
Heater Includes |
N/A 12" Ceiling/Bulkhead Bracket Auto and Manual Hi-Limit Thermostat Contactor Fan, Motor, and Louvers Fan/Off/Heat Switch Fused Transformer (When Required) Marine Terminal Box Operating Thermostat Stainless Steel Hermetically Sealed Heating Elements |
Construction |
N/A 16 Ga 304 Stainless Steel |
Suggested Applications |
N/A Cranes Factories Hangers Material handling equipment Mobile vans Oil rigs Ships Storage areas |
Certifications/ Guidelines |
N/A ANSI/UL-2021 I/A/W USCG IEEE 45 |
Options |
N/A D - Power Disconnect Switch FB - Floor Bracket RT - Remote Thermostat (24VAC) SB - Sway Bar |