Valad Electric Heating Corp | A Valid Choice
call 888.509.4927
fax 845.457.3793
info@valadelectric.com
Electric Hot Plates Electric Space Heaters Convection Heaters Electric Heating
Gallery Equipment
Electric Vent
Duct Heaters
Electric Heat Sealers Electric Heating
Elements
Electric Defroster / De-Icer Heaters Electric Heated Shears and Heat Controls
All Categories > Electric Hot Plates > High Temperature Digital Control Hot Plates / Warming Plates > View Items  

High Temperature Digital Control Hot Plates / Warming Plates

Check up to five results to perform an action.


Designed for pre-heating, reflow and any process that requires heating of an object under uniform and controlled temperature conditions with higher precision then our analog Hot Plates. These Hot Plates are rated for heavy loads and industrial conditions.These hot plates are NON-HAZARDOUS location hot plates.

Unit Construction: All units are manufactured in 304 Stainless Steel for ease of cleaning and to meet sanitary codes.

Electrical Specifications: Units are manufactured IEEE45 and built to guidelines of ANSI ETL UL/499, including custom applications.

  • Valad’s hot plates are designed to be used in adverse environments.
  • Units Include:
    • Replaceable Stainless Steel magnesium filled flat oval heating elements
    • 1/2" aluminum (leveled finish) top plates provide uniform heat transfer
    • All hot plates are provided with a 6 foot heavy duty cord and plug
    • The adjustable operating thermostat has a range from 100 to 550 deg F (Up to 750 deg F Available)
    • Temperature accuracy 2-4% of Setpoint
    • Cabinet: 304 Stainless Steel with mounting legs
    • Stainless Steel top available.
  • The wide range of sizes gives you maximum choice. These Hot Plates have various uses from lithograph to heating cosmetics to semiconductor manufacturing. Applications are extremely diversified. They are available in Sizes 6 x 6 thru 48 x 48. Custom sizes are also available.

    DIGITAL CONTROL HOT PLATES are equipped with:
    •  A digital readout controller displaying constant process temperature. Viewing and changing the set point temperature is as easy as pressing a button.
    • These Hot Plates are equipped with a pilot light to show that power is ON.
    • The controller has an indicator light to show when the elements are energized.

         ***When operating Hot Plates at high temperatures, above 550ºF, the life of the hot plate will be reduced.

         ***Heat-up time will vary depending on the load on the plate and the wattage of the plate.

Valad assumes no liability for loss, damage or personnel injury due to the high temperatures produced by hot plates.






    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 2 of 2 1 

Item #

Temperature

Temperature Accuracy

Voltage

Wattage

Phase

HPST - Standard 100 to 550 ºF
100 to 750
ºF
2-4% of Setpoint ºF 110/120 VAC
208/220
VAC
240
VAC
440
VAC
460
VAC
480
VAC
0.5 kW
1.0
kW
1.5
kW
2.0
kW
2.5
kW
3.0
kW
3.5
kW
4.0
kW
4.5
kW
5.0
kW
5.5
kW
6.0
kW
1 PH (50/60Hz)
3 PH (50/60Hz)
HPST - Dual Zone 100 to 550 ºF
100 to 750
ºF
2-4% of Setpoint ºF 110/120 VAC
208/220
VAC
240
VAC
440
VAC
460
VAC
480
VAC
0.5 kW
1.0
kW
1.5
kW
2.0
kW
2.5
kW
3.0
kW
3.5
kW
4.0
kW
4.5
kW
5.0
kW
5.5
kW
6.0
kW
1 PH (50/60Hz)
3 PH (50/60Hz)
  Results 1 - 2 of 2 1 
Valad Electric Heating Corp | A Valid Choice