Valad Electric Heating Corp.
Valad Electric Heating Corp.
Mailing Address:
65 Leonards Drive
Montgomery, NY 12549
Phone: 888.509.4927
Fax: 845.457.3793
E-Mail: info@valadelectric.com
Website: www.valadelectric.wpengine.com
Print Back

Designed for pre-heating, reflow and any process that requires heating of an object under uniform and controlled temperature conditions with higher precision then our analog Hot Plates. These Hot Plates are rated for heavy loads and industrial conditions.These hot plates are NON-HAZARDOUS location hot plates.

Unit Construction: All units are manufactured in 304 Stainless Steel for ease of cleaning and to meet sanitary codes.

Electrical Specifications: Units are manufactured IEEE45 and built to guidelines of ANSI ETL UL/499, including custom applications.

  • Valad’s hot plates are designed to be used in adverse environments.
  • Units Include:
    • Replaceable Stainless Steel magnesium filled flat oval heating elements
    • 1/2" aluminum (leveled finish) top plates provide uniform heat transfer
    • All hot plates are provided with a 6 foot heavy duty cord and plug
    • The adjustable operating thermostat has a range from 100 to 550 deg F (Up to 750 deg F Available)
    • Temperature accuracy 2-4% of Setpoint
    • Cabinet: 304 Stainless Steel with mounting legs
    • Stainless Steel top available.
  • The wide range of sizes gives you maximum choice. These Hot Plates have various uses from lithograph to heating cosmetics to semiconductor manufacturing. Applications are extremely diversified. They are available in Sizes 6 x 6 thru 48 x 48. Custom sizes are also available.

    DIGITAL CONTROL HOT PLATES are equipped with:
    •  A digital readout controller displaying constant process temperature. Viewing and changing the set point temperature is as easy as pressing a button.
    • These Hot Plates are equipped with a pilot light to show that power is ON.
    • The controller has an indicator light to show when the elements are energized.

         ***When operating Hot Plates at high temperatures, above 550ºF, the life of the hot plate will be reduced.

         ***Heat-up time will vary depending on the load on the plate and the wattage of the plate.

Valad assumes no liability for loss, damage or personnel injury due to the high temperatures produced by hot plates.

Industrial Digital Electric Hot Plate
Dual Zone Industrial Electric Hot Plate
Unit of Measure
Items Industrial Digital Electric Hot Plate
HPST - Standard
High Temperature Digital Control Hot Plates / Warming Plates 		Dual Zone Industrial Electric Hot Plate
HPST - Dual Zone
High Temperature Digital Control Hot Plates / Warming Plates
Temperature N/A 100 to 550 ºF100 to 750 ºF
Temperature Accuracy N/A 2-4% of Setpoint ºF
Voltage N/A 110/120 VAC208/220 VAC240 VAC440 VAC460 VAC480 VAC
Wattage N/A 0.5 kW1.0 kW1.5 kW2.0 kW2.5 kW3.0 kW3.5 kW4.0 kW4.5 kW5.0 kW5.5 kW6.0 kW
Phase N/A 1 PH (50/60Hz) 3 PH (50/60Hz)
Heater Includes N/A 1/2" Thick Aluminum Top Plate Cord and Plug Digital Control Thermostat 100-550 deg F HEATING Pilot Light ON/OFF Pilot Light On/Off Switch Stainless Steel Heating Elements
Construction Options N/A 1/2'' Stainless Steel Top Plate 3/4'' Aluminum Top Plate 3/4'' Stainless Steel Top Plate Digital Control Thermostat 100-750 deg F PTFE coating
Notes N/A Controls will be mounted on side "A". (Note: Digital Hot Plates are not ETL approved.)
Suggested Applications N/A Any procedure requiring a controlled heating surface Cosmetic Manufacturing Flavor Manufacturing Glass Making Lithograph Preheat assemblies Preheating for soldering operations Printmaking Semiconductor Production
Certifications N/A Built to guidelines of ANSI ETL UL/499 IEEE 45