Valad's Forced Air Heaters are manufactured from the highest quality corrosion resistant materials and meet military, marine and industrial specifications. Used to heat small to large non-hazardous environments to a specified temperature.

Cabinet: 304 Stainless Steel.

Heating Element: Stainless steel flat oval tubular design. Finns are furnace blazed to sheath. Heating elements are hermetically sealed.

Electrical Specifications: Units are manufactured to guide lines of USCG, IEEE45, UL, ETL, Navy, Army, Air Force and Marine Corp. standards; as well as custom applications.

Unit is manufactured I/A/W USCG, IEEE 45 and ANSI/UL-2021 specifications.
Unit of Measure

Voltage

N/A 220 VAC240 VAC440 VAC450 VAC460 VAC480 VAC600 VAC

BTU

N/A 25591-42652 Btu

Wattage

N/A 10.0 kW10.5 kW11.0 kW11.5 kW12.0 kW12.5 kW7.5 kW8.0 kW8.5 kW9.0 kW9.5 kW

Phase

N/A 3 PH

Cycle

N/A 60 Hz

Air Volume (CFM)

N/A 855

Air Outlet Height

N/A 17 in

Air Outlet Width

N/A 13.5 in

Weight

N/A 85 lb

Heater Includes

N/A 12" Ceiling/Bulkhead Bracket Auto and Manual Hi-Limit Thermostat Contactor Fan, Motor, and Louvers Fan/Off/Heat Switch Fused Transformer (When Required) Marine Terminal Box Operating Thermostat Stainless Steel Hermetically Sealed Heating Elements

Construction

N/A 16 Ga 304 Stainless Steel

Suggested Applications

N/A Cranes Factories Hangers Material handling equipment Mobile vans Oil rigs Ships Storage areas

Certifications/ Guidelines

N/A ANSI/UL-2021 I/A/W USCG IEEE 45

Options

N/A D - Power Disconnect Switch FB - Floor Bracket RT - Remote Thermostat (24VAC) SB - Sway Bar