Valad's Convection Heaters are another in an extensive line of quality products designed and built to military, naval, coastal, UL and IEEE 45 specifications.

Unit manufactured to I/A/W USCG, IEEE 45, ANSI/UL-2021 and military specifications.
Unit of Measure

Voltage

N/A 110/120 VAC208/220 VAC240 VAC440 VAC450 VAC460 VAC480 VAC

Wattage

N/A 1.5 kW2.0 kW2.5 kW3.0 kW

Phase

N/A 1 PH 3 PH

Cycle

N/A 50/60 Hz400 Hz

Weight

N/A 40 lb

Case Depth

N/A 4 in

Heater Includes

N/A Manual Thermal Cut-Out/Auto Optional On/Off Switch Operating Thermostat Terminal Block for Power Hook-Up

Construction

N/A 18 GA Stainless Steel Cable Entrance/Rear or Bottom Element Hermetically Sealed Finns Furnace Brazed to Sheath Heating Element-Stainless Steel

Suggested Applications

N/A Bathrooms Cargo areas Control rooms Crew quarters Engine rooms Heads Industrial/Offices Ships/Hallways Storage rooms

Options

N/A Manual Thermal Cut-Out/Auto

Notes

N/A 440 VAC units require an additional control box on right side of heater - add approximately 4" to width. An Auto Hi-Limit set to 250º F is standard on all 440V models.

Automatic and manual thermal cut out set to 250º F available on DFM, DFMH, DFML and DFMLH only.

Certifications

N/A ANSI/UL-2021 I/A/W USCG IEEE 45 Military Specifications

BTU

N/A 5118-10236 Btu